Multi Autolab/M101

Description

Metrohm Autolab

Metrohm Autolab

The Multi Autolab/M101 is a multi channel potentiostat/galvanostat based on the compact Autolab PGSTAT101. It consist of a Multi Autolab Cabinet which can be fitted with up to 12 M101 modules. Each M101 is a completely independent potentiostat/galvanostat, allowing you to perform different measurements on each channel at the same time.

The Multi Autolab can be controlled from up to three different computers simultaneously, allowing to share the available channels among different users.

The Multi Autolab instruments can be complemented by a selection of optional modules. Each M101 module can be coupled to one optional module in the instrument. The maximum number of optional modules is 6. Optional modules or additional M101 modules can be installed at any time.

Key Differences

< click here

Technical Specification

< click here


Analog integrator true

Compliance voltage range in volt ± 10

Current resolution 0.0003% of current range

Dimensions in mm (W/H/D) 520/160/520

Dimensions remark without cables

Input impedance in Ohm 100 G

Maximum bandwidth in Hz 1 M

Maximum current in ampère ± 0.1

Maximum number of channels 12

Modular instrument true

Multichannel instrument true

Number of current ranges 7

Number of current ranges remarks 10 nA to 10 mA

Potential and current accuracy V: ± 0.2% ± 2 mV and i: ± 0.2% ± 0.2% of current range

Potential range in volt -10 V to 10 V

Potential resolution 3 µV (gain 100)

Weight of the instrument in kg 13

Multi Autolab/M101

Downloads

Related Products

PGSTAT302F