The automatic film coater MEMCAST™ is ideal for the synthesis of flat sheet polymeric membranes by coating a thin film with a polymer solution followed by the immersion of the films in a coagulation bath to obtain the final membrane via wet phase inversion. Reproducible film layers can be prepared, either self-standing (e.g. coating directly onto glass, stainless steel, etc.) or on various substrates (e.g. nonwoven, polymeric supports, etc.).
The design minimizes movement during film application in order to obtain smooth and consistent films. It is robust, durable, easy to clean, and very user-friendly.
< click here
Includes a flat coating plate.
Easy mechanism to attach/detach the coating support, allowing fast immersion in a coagulation bath.
Automatic return of the pushing mechanism at the end of the coating length.
Optional stop of the pushing mechanism during application to determine the length of the coating.
Stainless steel 316 coating plate.
Digital display to set temperature and read the actual temperature, as well as to read the set coating (casting) speed. One standard casting knife with 2 compartments (2 coating lines) and 4 standard coating thicknesses of 100 μm, 150 μm, 250 μm, and 500 μm.
< click here
Dimensions (approx.) 780 x 490 x 320 mm
Weight (aprox) 29 kg (64 lb)
A wide range of single-line and high throughput casting knives is available offering different coating thicknesses, ranging from 50 μm up to 1000 μm. The user can select the number of coating lines, comprised between 1 and 8.
Coating size: ca. 340 * 500 mm
Coating speed: 0.2 up to 10 cm/s
Heating of the coating surface: Up to 80 ºC