2060 MARGA M
Description
Metrohm Process Analytics
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by utilizing a size-selective inlet (e.g. PM 1.0, PM 2.5 or PM 10). The water-soluble gases are absorbed in a Wet Rotating Denuder (WRD) device and then the water-soluble ions in the aerosols are extracted in a Steam-Jet Aerosol Collector (SJAC).
A dual-channel ion chromatograph (IC) quantifies anions and cations in aerosols and water-soluble gases simultaneously with high accuracies to reach detection limits as low as 0.001 µg/m3.
The analyzer’s performance can be remotely observed by using a direct internet connection to make adjustments when necessary and to access stored results.
Key Differences
< click here
The 2060 MARGA M version is ideal for 24/7 continuous monitoring at a permanent site.
Data collection with a time resolution of 1h to study e.g. diurnal variation or trajectory models for pollution events.
Remote control or touch screen to easily access results, trend graphs, and more.
Gases measured: Hydrochloric Acid (HCl), Nitric acid (HNO3), Nitrous acid (HONO), Sulfur dioxide (SO2), Ammonia (NH3)
Aerosol ions measured: Chloride (Cl-), Nitrate (NO3-), Sulfate (SO42-), Ammonium (NH4+), Potassium (K+), Calcium (Ca2+), Magnesium (Mg2+)
Technical Specification
< click here
Ambient Temperature20-30 °C
Dimensions in mm (W/H/D)660/1810/605 (Max swing out door wet part: 1110)
Dimensions remarkBased on 2060 MARGA M version
Ingress ProtectionIP40
Number of sample streams1
Weight kg165 kg
Flow rate: 0.5 m3/h or 1.0 m3/h (Critical orifice)
User interface: 15” color XGA + PCAP touch screen
Data communication: Ethernet: TCP/IP Network, USB 2.0
USB output: 2 × USB ports
Power supply: 100 – 120 / 220 - 240 VAC, 50-60Hz, max. 935 VA (calculated)
Conformity: MagIC Net 3.2 is completely compliant with FDA 21 CFR Part 11. Metrohm Applikon B.V. conforms to quality standard ISO 9001:2008
Electric Protection Class: I
Housing material: Wet part cabinet: Polystyrene, polymethane coated / Electrical cabinet: SS304 steel, polyester coated
Relative Humidity: 10-80% RH, non-condensing
Analysis: Batchwise; Hourly
Software package: 2060 software in combination with MagIC Net 3.2
Downloads
Related Products