µStat ECL Electrochemiluminescence Instrument

Description

Metrohm Dropsens

Metrohm Dropsens

μStat ECL is a portable BiPotentiostat/Galvanostat combined with a specific ElectroChemiLuminescence (ECL) Cell that performs Electrochemiluminescence studies with DropSens Screen-Printed Electrodes (SPEs). Electrochemical and Chemiluminescence responses are perfectly synchronized and shown in real time. The equipment can also be used independently as a Bipotentiostat/Galvanostat.

Key Differences

< click here

Technical Specification

< click here


Current accuracy≤0.5 % of current range at 100 nA to 10 mA

Current resolution0.1 % of current output range

Dimensions in mm (W/H/D)Potentiostat: 121x36x130 ; ECL Cell: 65x39 75

Maximum current in Ampère±40 mA

Maximum number of channels1

Maximum number of WE sharing AUX and REF2

Measured current resolution0.025 % of current range (1 pA on lowest current range)

Measured potential resolution0.012 % of potential range

Multichannel instrumentNO

Number of current ranges8

Number of current ranges remarks±1 nA to ±10 mA

Number of potential ranges (galvanostat)2

Number of potential ranges remarks (galvanostat)±100 mV, ±1 V

OD Peak sensitivity wavelenght960 nm

OD PGA gain0.62 V/nW (310 ecl units/nW)

OD Spectra response range340-1100 nm

Operating modesBipotentiostat ; Potentiostat ; Galvanostat

Optical detector (OD)Silicon photodiode with preamp

PC interfaceBluetooth® ; USB

Potential accuracy±0.2 %

Potential range in volt±4 V

Potential resolution1 mV

PowerLi-ion Battery (1250 mAh) ; USB ; DC charger adaptor compatible (5 V)

Weight of the instrument in kg0.655


µStat ECL Electrochemiluminescence Instrument

Downloads

Related Products

µStat 8000 Multi Potentiostat/Galvanostat
μStat-i 400s Potentiostat/Galvanostat/Impedance Analyzer (EIS)
μStat-i 400 Bipotentiostat/Galvanostat/Impedance Analyzer (EIS)