µStat 4000 Multi Potentiostat/Galvanostat


Metrohm Dropsens

Metrohm Dropsens

μStat 4000 is a portable Multi Potentiostat/Galvanostat that can be applied for Voltammetric, Amperometric or Potentiometric measurements, being able to perform up to 4 different independent measurements at the same time and including also a multichannel mode that allows you to work with up to 4 working electrodes sharing auxiliary and reference electrode. Li-ion Battery powered, it can be easily connected to a PC via USB or Bluetooth®.

Key Differences

< click here

Technical Specification

< click here

Current accuracy ≤0.5 % of current range at 100 nA to 1 mA ; ≤1 % of current range at 10 mA to 100 mA

Current resolution 0.1 % of current output range

Dimensions in mm (W/H/D) 205 x 75 x 222

External inputs/outputs 5 Digital Inp 1, PIO 2, PIO 3, PIO 4, PIO 5] ; 3 Analog Inputs multiplexing PIO 1, PIO 2, PIut/Output pins [PIOO 3 ; 2 Analog Outputs (configurable I-out or E-out)

Maximum current in Ampère ±80 mA

Maximum number of channels 4

Maximum number of WE sharing AUX and REF 4

Measured current resolution 0.025 % of current range (1 pA on lowest current range)

Measured potential resolution 0.012 % of potential range

Multichannel instrument YES

Number of current ranges 9

Number of current ranges remarks ±1 nA to ±100 mA

Number of potential ranges (galvanostat) 2

Number of potential ranges remarks (galvanostat) ±100 mV, ±1 V

Operating modes 4x 1 Channel Potentiostat/Galvanostat ; 1x 4 Channel Potentiostat

PC interface Bluetooth® ; USB

Potential accuracy ±0.2 %

Potential range in volt ±4 V

Potential resolution 1 mV

Power Li-ion Battery (6150 mAh) ; USB ; DC charger adaptor compatible (5 V, 15 W)

Weight of the instrument in kg 1.5

µStat 4000 Multi Potentiostat/Galvanostat


Related Products

µStat 8000P Multi Potentiostat
µStat 8000 Multi Potentiostat/Galvanostat
μStat-i 400s Potentiostat/Galvanostat/Impedance Analyzer (EIS)
μStat-i 400s Potentio...
µStat ECL Electrochemiluminescence Instrument