ADI 2045PL ProcessLab

The ProcessLab ADI 2045PL is a robust routine system for at-line ion analysis on the production floor and in control labs. It is typically used for multiple sampling points and parameters that do not require fast analysis and response times. Samples are taken manually at each sampling point, fed into the ProcessLab (manually or by means of an autosampler), and automatically analyzed.

The ProcessLab is offering a variety of techniques: titration, colorimetry and ISE measurements. Additional techniques can be integrated such as density, temperature, flow, turbidity and conductivity.

The ProcessLab Manager software offers a flexible user-defined platform with an easy-to-use graphical interface. ProcessLab ADI 2045PLis easily integrated to a local network or fully operated by remote control.

Ambient Temperature 5-40 °C

Dimensions in mm (W/H/D) 700/870/510

Dimensions remark Dimension without stand

Ingress Protection IP66/NEMA4

Number of sample streams 1 to 10

Weight kg 75

ADI 2045TI Ex proof Analyzer

The ADI 2045TI Ex proof Process Analyzer is used in hazardous environments where explosion proof protection is a critical safety requirement. The analyzer fulfills EU Directives 94/9/EC (ATEX95) and is certified for Zone-1 and Zone-2 areas. The analyzer design combines a purge/pressurization system with intrinsic safety electronic devices. The air purging phase and permanent overpressure prevents any potentially explosive atmosphere in the ambient air from entering the analyzer enclosure. The analyzer smart design avoids the need for purging large analyzer shelters and can be located at the production line in the hazardous zone.

Titration, Karl Fischer titration, photometry, measurements with ion selective electrodes, and direct measurements are all possible with this Ex-p version.

Ambient Temperature 5-40 °C

Ingress Protection IP66/NEMA4

Number of sample streams 1 to 10

Weight kg 125

ADI 2045TI Process Analyzer

The ADI 2045TI is a wet chemical analyzer. At its core lies an industrial PC with an industry standard Communication Logic Controller. Its modular wet part gives maximum flexibility to adapt the configuration to a specific application. The burettes or pumps can be chosen for all liquid handling and selection valves implemented for multiple sample streams.

Simultaneous analysis between two streams and several methods gives faster response times. The control software on top of tiamo allows the user to program different sequences of analysis and set conditions and alarms. Remote access is achieved with a standard remote desktop tool for further diagnostics.

The 2045TI is offering wet chem techniques: titration, Karl Fischer titration, colorimetry, direct measurement and standard additions methods. Data from external devices such as flow, density and turbidity can be imported and processed by the analyzer to compensate for results automatically and provide added monitoring value.

Ambient Temperature 5-40 °C

Dimensions in mm (W/H/D) 700/870/510

Dimensions remark Dimension without reagent cabinet

Ingress Protection IP66/NEMA4

Number of sample streams 1 to 10

Weight kg 75

ADI2045VA Process Analyzer

The ADI 2045VA analyzer is based on the principle of Voltammetric Analysis. The analytical heart of the analyzer is the Metrohm 797 Computrace with Multi Mode Electrode (MME) or Rotating Disk Electrode (RDE) sensor options depending on the application. For online control of water and wastewater quality and industrial mining processes the analyzer is used to determine low concentrations of multiple heavy metals e.g. Cu, Zn, Cd, Pb, Ni and Co. The concentration range can vary from ppm down to ppb/ppt trace detection.

The 2045VA can be equipped with a UV or thermal digester module to release metals if they are bound in (organic) compounds. In electroplating baths for the production of PCBs and semiconductors the analyzer utilizes CVS/CPVS voltammetric stripping methods.

Typical applications are for organic additives such as brighteners, levelers and suppressors. Quantification of these bath additives require different calibration methods and have all been implemented in the analyzer software.

Ambient Temperature 5-40 °C

Dimensions in mm (W/H/D) 700/870/510

Dimensions remark Dimension without reagent cabinet

Ingress Protection IP66/NEMA4

Number of sample streams 1 to 10

Weight kg 85

ORDER SERVICE

GET A QUOTE

SEND A MAIL

Chemical Identification