Standard operating procedures and fully developed methods for regulated and routine methods save you weeks of method development and documentation time.
Ultra High Matrix Introduction (UHMI) reduces sample preparation time by allowing you to directly analyze samples containing up to 25% total dissolved solids without dilution.
Helium collision cell and half-mass correction remove troublesome polyatomic and doubly-charged interferences that can reduce data quality and increase the need for costly sample remeasurements.
Measure high matrix samples without having to matrix-match calibration standards. Hydrochloric acid can also be added to stabilize important elements including Hg, Ag, Mo without introducing new interferences.
Identify unusual sample matrices using IntelliQuant and get a complete elemental profile of each sample. A range of displays, including Periodic table heat map allow you to easily identify abnormal levels of major or unexpected elements.
Outlier Conditional Formatting (OCF) reduces data review times for busy or inexperienced ICP-MS operators by highlighting results that are outside a nominated range or have failed a test requirement. Alerts can be configured for different requirements.
Early Maintenance Feedback (EMF) uses sensors and counters to determine when maintenance is needed. Traffic light, color-coded alerts means maintenance tasks are never missed but are also not performed more frequently than necessary.
ICP Go is an optional, browser-based user-interface for mobile devices offering simplified set up and control of routine sample batches and is great for ICP-MS operators on the move.
Method-specific Analyzer packages containing ICP-MS hardware, software, consumables, professional services and documentation ensure you’ll be running samples in weeks, instead of the months it can take to develop, optimize, verify and document a regulated method.

How to get accurate results for high matrix samples

High matrix samples can cause signal drift and plasma suppression, resulting in inaccurate results and forcing repeat analyses. The 7850’s Ultra High Matrix Introduction system uses an argon stream to dilute samples. Samples with matrix levels up to 25% TDS can be measured without time-consuming and error-prone manual dilutions.

The helium collision cell and half-mass correction of the 7850 automatically remove polyatomic and doubly-charged ion interferences. These functions simplify method development and remove a common cause of measurement failure.

Learn more >

Know more about your samples with IntelliQuant

Unusual sample matrices can cause unexpected issues. Knowing what’s in your samples allows you to avoid problems and costly sample remeasurement. The IntelliQuant software function uses the full mass spectrum to completely profile each sample’s composition. The results are displayed as a heat map, allowing you to quickly identify unexpected or abnormally high levels of elements and sample preparation mistakes. This information helps to confirm dilution factors, calibration ranges and identify possible matrix effects on internal standard elements.

Learn more >

The right maintenance at the right time

Insufficient maintenance can compromise performance and cause unplanned downtime, wasting valuable time. Performing maintenance too frequently also wastes time and increases consumables costs, with no real benefit. Early maintenance feedback uses sensors and counters to determine when maintenance is needed, based on instrument usage. The traffic light color-coded alerts mean that maintenance tasks are never missed, nor performed more frequently than necessary. A well-maintained ICP-MS gives better performance and saves your lab time and money.

Learn more >

New Service ISO 17025 Calibration

ORDER SERVICE

GET A QUOTE

SEND A MAIL

Cannabis & Botanical

7 L

7 L

L-1

SCFN L-1

5 L Multi

5 L Multi

L-2

L-2